poxa.... tava guardando essas...rs
Segue as fotos do Mitus 206La:
Módulo:
[attachment=477]
Ela sem a grade frontal:
[attachment=478]
As guias nos falantes (de6.5"):
[attachment=480]
A guia de ondas do driver é acoplado diretamente na parte frontal do gabinete, que achei muito bacana.
e a parte traseira, no qual só visualizamos apenas o driver:
[attachment=479]
Segue os dados:
600W + 300W - 134dB SPL Active precision coverage vertical array
· 2 x 6.5’’ (165 mm) B&C neodymium woofers with 1.7’’ (44 mm) coil
· 1.4’’ (36 mm) exit B&C neodymium driver with 2.5’’ (64 mm) coil
· Frequency response from 68Hz to 20KHz
· Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply
· DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading
· Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift
· 100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
· High impact polypropylene gas-injected enclosure withintegrated rigging hardwareadjustable with 0° to 10°angle between cabinets at2° step
· Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage
· to multiple cabinet full sized line array, the MITUS 206LA maybe used also in outdoor applications where the system is not directly exposed to the elements
· Wide range of hardware accessories for flying and ground stacked configurations
· Very lightweight, only 14Kg
<!-- m --><a class="postlink" href="http://fbt.it/ENG/PAE/PRODOTTI/LINE-ARRAY/MITUS/Mitus-206-/">http://fbt.it/ENG/PAE/PRODOTTI/LINE-ARR ... itus-206-/</a><!-- m -->
[attachment=481]
Ah, esqueci de mencionar: LEVE, MUITO LEVE!
gugasom disse:
tava querendo ver clipar mas falou alto mesmo e fui conferir se tava clipando, que nada,!!!
é.... sempre tento clipar as FBT, mas é difícil pra caramba!rsrs