Fala galera,
Segue mais um sistema compacto que pude realizar um teste juntamente com o Guga, no qual gostei muito pela proposta: FBT Vertus.
Trata-se de um sistema composto por, digamos, TOP + SUB:
VERTUS CLA604A 400W + 100W RMS 125DB SPL COLUMN ACTIVE LINE ARRAY
· 2-way bi-amplified Line Array Column
· 6 x 4" (100mm) custom woofer with 1" (25 mm) voice coil
· 4 x 1" (25mm) neodymium dome tweeter on waveguide
· 130Hz to 20KHz frequency response
· Class D 400Wrms amplifier for LF and 100Wrms for HF with switch mode power supply
· DSP processor with 4 available equalization presets
· Control panel with volume, presets, HP filter, Mic-Line, status LED
· XLR input and Neutrik POWERCONN supply input at the lower part of the column; XLR link and Neutrik POWERCONN loop output at the higher part, in order to hide each connection cable
· 100°H x 20°V dispersion
· Extruded-aluminum powder-coated cabinets. Superior latching system, enables the extension of the length of the line array by adding CLA604A modules for increased modularity of the system.
· Possibility to angle the columns of +/- 30° on a horizontal plane
· Ideal for both live applications, assisted by the CLA 208SA active subwoofer, as well as for fixed installation
· Easily expandable for a total power of 6600W (stereo system composed of 3 x CLA604A and 3 x CLA208SA)
· Very light and easy to carry
http://fbt.it/ENG/PAE/PRODOTTI/LINE-A..">http://fbt.it/ENG/PAE/PRODOTTI/LINE-A..</a><!-- m -->.
Vertus CLA208Sa 600W RMS 129dB SPL Processed Active Subwoofer
· Active subwoofer in bass-reflex design
· 2 x 8" (200mm) custom neodymium, high-excursion woofer with 2" (50 mm) voice coil
· 50Hz to 180Hz frequency response
· Class D 600W RMS amplifier with switch mode power supply
· DSP processor with 4 available presets
· Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED
· Neutrik POWERCONN input and link
· 15mm birch plywood enclosure with anti-scratch paint finish, stackable
· M20 stand adapter, 2 integrated handles, front hardware to sustain CLA206LA modules
· Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance
<!-- m --><a class="postlink" href="http://fbt.it/ENG/PAE/PRODOTTI/LINE-A..">http://fbt.it/ENG/PAE/PRODOTTI/LINE-A..</a><!-- m -->.
[video=youtube]http://www.youtube.com/watch?v=nGfuqYVW08Y[/video]
MINHA CONCLUSÃO:
Ótimo sistema, resposta muito plana em todo espectro.
Ideal onde não se faça necessário muita pressão, como exemplo: pockets shows exigentes com a qualidade!rs
Altamente compacto e muito leve!
O sub deixou de responder bem a uns 8~10 metros, no local do teste é claro.
Algumas fotos:
[attachment=458][attachment=459][attachment=460][attachment=461][attachment=462]
Segue mais um sistema compacto que pude realizar um teste juntamente com o Guga, no qual gostei muito pela proposta: FBT Vertus.
Trata-se de um sistema composto por, digamos, TOP + SUB:
VERTUS CLA604A 400W + 100W RMS 125DB SPL COLUMN ACTIVE LINE ARRAY
· 2-way bi-amplified Line Array Column
· 6 x 4" (100mm) custom woofer with 1" (25 mm) voice coil
· 4 x 1" (25mm) neodymium dome tweeter on waveguide
· 130Hz to 20KHz frequency response
· Class D 400Wrms amplifier for LF and 100Wrms for HF with switch mode power supply
· DSP processor with 4 available equalization presets
· Control panel with volume, presets, HP filter, Mic-Line, status LED
· XLR input and Neutrik POWERCONN supply input at the lower part of the column; XLR link and Neutrik POWERCONN loop output at the higher part, in order to hide each connection cable
· 100°H x 20°V dispersion
· Extruded-aluminum powder-coated cabinets. Superior latching system, enables the extension of the length of the line array by adding CLA604A modules for increased modularity of the system.
· Possibility to angle the columns of +/- 30° on a horizontal plane
· Ideal for both live applications, assisted by the CLA 208SA active subwoofer, as well as for fixed installation
· Easily expandable for a total power of 6600W (stereo system composed of 3 x CLA604A and 3 x CLA208SA)
· Very light and easy to carry
http://fbt.it/ENG/PAE/PRODOTTI/LINE-A..">http://fbt.it/ENG/PAE/PRODOTTI/LINE-A..</a><!-- m -->.
Vertus CLA208Sa 600W RMS 129dB SPL Processed Active Subwoofer
· Active subwoofer in bass-reflex design
· 2 x 8" (200mm) custom neodymium, high-excursion woofer with 2" (50 mm) voice coil
· 50Hz to 180Hz frequency response
· Class D 600W RMS amplifier with switch mode power supply
· DSP processor with 4 available presets
· Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED
· Neutrik POWERCONN input and link
· 15mm birch plywood enclosure with anti-scratch paint finish, stackable
· M20 stand adapter, 2 integrated handles, front hardware to sustain CLA206LA modules
· Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance
<!-- m --><a class="postlink" href="http://fbt.it/ENG/PAE/PRODOTTI/LINE-A..">http://fbt.it/ENG/PAE/PRODOTTI/LINE-A..</a><!-- m -->.
[video=youtube]http://www.youtube.com/watch?v=nGfuqYVW08Y[/video]
MINHA CONCLUSÃO:
Ótimo sistema, resposta muito plana em todo espectro.
Ideal onde não se faça necessário muita pressão, como exemplo: pockets shows exigentes com a qualidade!rs
Altamente compacto e muito leve!
O sub deixou de responder bem a uns 8~10 metros, no local do teste é claro.
Algumas fotos:
[attachment=458][attachment=459][attachment=460][attachment=461][attachment=462]
